AVENTOS HK top Adjustments
AVENTOS
AVENTOS HK top door adjustment
Use a T20 TORX screwdriver to perform cam adjustments for each of the three-dimensional door adjustments.
mm
mm
mm
Attaching cover caps
Place the left and right cover plates over the appropriate lift mechanisms, and snap them in place.
21
1 2 3
3
1
2
1
Adjust opening angle
Turn adjustment screw, with a T20 TORX screwdriver, until tight on both sides and desired angle is reached.
NOTE: Adjustments can be made with the cap on
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
17
To Next Page
Loading...
