SERVO-DRIVE for
AVENTOS HK top
Electrical Components
*12 W Output power applies to SERVO-DRIVE uno only
SERVO-DRIVE switch adapter
SERVO-DRIVE switch adapter
23P5216
Option 1: Power supply set
Set includes:
Power supply set
Z10NE03UG10
Part no.
Space requirements and safety distance for power supply
A safety distance of 30 mm must be maintained for air circulation
Option 2: SERVO-DRIVE uno power supply
Supplies power to a single drive unit
Power supply set
Z10NA30UGF
Input specifications
Input voltage 100-240 VAC
Input frequency 50-60 Hz
Input current 0.6 A
Inrush current 100 A maximum at 240 VAC
Protection class Class I
Earth leakage current 3.5 mA maximum
Output specifications
Output voltage 24 VDC
Output power
24 W continuous / 12 W continuous
*
Minimum load None
Over voltage protection At 33 VDC
Overload protection
10.5 A hiccup trip and restart mode with
auto recovery
Short circuit protection Continuous
General specifications
Efficiency ≥ 87%
Switching frequency 65 kHz typical
No load loss (standby) < 0.075 W
Energy Star Level VI
Safety / Approvals
EN / IEC 60950, 60335-1
UL 60950-1
Environmental information
Operating temperature
32° F‒104° F
Storage temperature -4° F to 185° F
Protection IP40
SERVO-DRIVE switch
For adding additional activation switches to a
SERVO-DRIVE for AVENTOS application.
SERVO-DRIVE switch (set of 2)
23P5020
Part no.
▬ Power supply
▬ Wall mount bracket
▬ Three-prong power cord
▬ Cable connector
▬ Cable end protector (qty 3)
▬ Cable clips (qty 10)
▬ 19 feet universal cable
▬ 44" power cord
▬ Extendable up to 6 feet
using cable connectors
(sold seperately)
Part no.
NOTE: A switch can only be synchronized to one drive unit
▬ Used for face frame and
frameless applications
▬ Doesnt require boring into
side of cabinet
▬ Color options: light gray, dark
gray or silk white
Part no.
▬ Up to six switches can be
added per drive unit
▬ Color options: light gray, dark
gray or silk white
Dimensions in millimeters (inch equivalents as noted) © 2021 Blum, Inc.
23
To Next Page
Loading...
