BLUM TANDEMBOX plus - User Manual

Space requirement and installation dimensions 所需空間及安裝尺寸
1
2
1
2
Adjustment 調節
Side adjustment 左右調節 ± 1 mm
Height adjustment 上下調節 ± 2 mm
Tilt adjustment 斜度調節
Removal 拆卸
Subject to technical modifications and changes to the range without notice All content is copyrighted by Blum
Assembly instruction 安裝說明
BAU0041382970 IDX:01 IDNR:076.190.01 MA-649/0ML 09.16
Copyright Blum
Assembly 組裝
Cabinet width 櫃闊 > 600 mm
Z31A0008
39.5
32
64
64
min 47.5
X
(min 55)
32
12
64
Ø 10
+0.2
Ø 10
min
10
-0.1
+0.2
-0.1
1
Front stabilisation piece assembly
前板穩定件 - 安裝於抽屜底部
Z96.10E1
TANDEMBOX plus
Blum Furniture Hardware
Hongkong Limited
Tel.: 852-2572 2816
Fax: 852-2572 2817
E-Mail: info.hk@blum.com
www.blum.com.hk
- Wipe using lightly damp soft cloth
用微濕的軟布抹擦
- Only use clean water, do not use chemical cleaners
使用淸水便可，請勿使用化學淸潔劑
Cleaning Instructions 淸潔指引
Attention:
Avoid dust get into the cabinet
profile during installation
請注意：
安裝時請避免木屑掉進路軌

Summary

Assembly

Front Stabilisation Piece Assembly

Assembly of the front stabilization piece for drawer bases.

TANDEMBOX Plus Assembly Instructions

Space Requirement and Installation Dimensions

Details the necessary space and dimensions for correct installation.

Adjustment

Side Adjustment

Instructions for adjusting the drawer side-to-side by ±1 mm.

Height Adjustment

Instructions for adjusting the drawer height by ±2 mm.

Tilt Adjustment

Procedure for adjusting the tilt angle of the drawer.

Removal

BLUM TANDEMBOX plus Specifications