EasyManua.ls Logo

Blumfeldt Cosmic Beam Series - Operation

Blumfeldt Cosmic Beam Series
72 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
EN
Note: The parts required for the installation extension are not included and
must be purchased separately.
OPERATION
Before rst use, please read this manual thoroughly.
Take out the heater from the carton carefully. Please save the carton for
off-season storage,
Firmly x the heater according to the installation instructions.
Make sure that you do not use the same socket for the heater and other
high-power appliances, as this could lead to mains overload.
Switch on
The power light ashes when the heater is connected with power.
Press the ON/OFF button , to turn on the heater. The screen shows
the temperature of the room. If it is lower than the preset temperature,
the heating function will be activated and the indicator light will blink.
Lock function
During operation, rst press the SWITCH button
Switch
and then the ON/
OFF button , the indicator light lights up. All keys are deactivated
when the lock function is enabled.
Display screen ON/OFF function
If you press the DISPLAY button
Display
, the screen turns off but the
indicator light remains on.
Press the DISPLAY button
Display
again to turn the screen back on.

Related product manuals