EasyManuals Logo
Home>Blumfeldt>Outdoor Fireplace>Orbit

Blumfeldt Orbit User Manual

Blumfeldt Orbit
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
EN
OPERATION
Ignite Fire
1 Make sure that the re bowl is placed on a rm, at, level and heat-
resistant surface away from ammable objects.
2 Place paper or dry rewood in the middle of the re tray base.
Note: Do not place fuel directly in the re bowl but always on the paper or
the rewood.
3 Light the paper or rewood.
Note: Light a small re rst and then let it slowly grow. If the heat develops
too quickly and too strongly, cracks may occur in the construction.
Stoke the Fire
Add more fuel to slowly increase the heat. Do not overload the re bowl
with fuel. Three small logs are sufcient.
Use the scraping tool when rearranging the logs.
Extinguish Fire
To extinguish the re bowl, do not add fuel or suffocate the re with sand. Do
not extinguish the re with water!
Use as a grill
The grill and the equipment must be clean and free of residues before
grilling.
Put approx. 0.5 kg of coal on the coal grid and ignite the coal according to
the instructions above.
Place the grill on the re bowl. Make sure that the grille is rmly in place.
Start grilling when the fuel has an ash layer.
The food must be completely cooked before consumption.
Do not remove the grate until the grill has completely cooled down.
Always clean the grill rack and cutlery after grilling.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blumfeldt Orbit and is the answer not in the manual?

Blumfeldt Orbit Specifications

General IconGeneral
BrandBlumfeldt
ModelOrbit
CategoryOutdoor Fireplace
LanguageEnglish

Related product manuals