24
EN
NOTES ON OPERATION
• Fill in enough cleaner water before using the fountain.
• If you no longer use the fountain, turn off the pump and remove the water.
• If the fountain is dirty, clean it with a soft cloth.
TROUBLESHOOTING
Problem Possible cause Solution
The fountain‘s not
running.
The plug is not
connected.
Insert the plug into the
socket.
The ow control of the
pump is not turned on.
Turn the ow control of
the pump clockwise to
increase the ow.
The water pipe is bent. Straighten the pipe.
The water‘s not owing
right.
The ow control of the
pump is not turned on.
Turn the ow control of
the pump clockwise to
increase the ow.
Not enough water in
the fountain.
Put more water in the
fountain.
Air trapped in the
pump.
Switch off the pump
and restart it.