The HEX70B-RX/TX is a 4K HDBaseT™ extender set designed to extend HDMI, bi-directional IR, and bi-directional PoH (Power over HDBaseT™) signals over a single CAT cable. This kit offers market-leading features and outstanding value, providing reliable signal transmission up to lengths of 70m.
Function Description:
The HEX70B-KIT consists of a Transmitter (HEX70B-TX) and a Receiver (HEX70B-RX) unit. The Transmitter unit takes an HDMI input signal and converts it for transmission over a single CAT cable, along with IR and PoH signals. The Receiver unit then receives these signals, converts them back to HDMI, and outputs them to a display. The bi-directional IR allows control of source devices from the display location and vice versa, while bi-directional PoH enables either the transmitter or receiver unit to power the entire extender set, simplifying installation by requiring only one power supply.
Important Technical Specifications:
- Video Extension: Extends HDMI signals up to 70m over a single CAT cable.
- 4K UHD Video Support:
- Up to 40m for 3840 x 2160 @30Hz 4:4:4.
- Up to 40m for 4096 x 2160 @24Hz 4:4:4.
- Up to 40m for 4K @60Hz 4:2:0.
- Video Resolutions: Supports all industry standard video resolutions, including VGA-WUXGA and 480i-4K.
- 3D Signal Display: Supports 3D signal transmission.
- Audio Formats: Supports all known HDMI audio formats, including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus, and DTS-HD Master Audio transmission.
- HDCP Compliance: The device is HDCP compliant.
- IR Support: Bi-directional IR from all input and output locations.
- PoH (PoE) Support: Bi-directional PoH (Power over HDBaseT™) to power extenders from either the transmitter or receiver end.
- Power Supply: 12V/2A DC, screw type connector.
- Power Consumption: 9.5W.
- Dimensions (WxDxH): 105x73x27mm for each unit.
- Shipping Weight: 0.4kg for each unit.
- Operating Temperature: 32°F to 104°F (0°C to 40°C).
- Storage Temperature: -4°F to 140°F (-20°C to 60°C).
- Rack-Mountable: Mounting kit included.
HEX70B-TX (Transmitter) Specifications:
- Video Input: 1x HDMI Type A, 19-pin, female.
- HDBaseT Output: 1x HDBaseT™ RJ45.
- IR Input Ports: 2x 3.5mm stereo jack.
- IR Output Ports: 2x 3.5mm mono jack.
HEX70B-RX (Receiver) Specifications:
- HDBaseT Input: 1x HDBaseT™ RJ45.
- Video Output: 1x HDMI Type A, 19-pin, female.
- IR Input Ports: 2x 3.5mm stereo jack.
- IR Output Ports: 2x 3.5mm mono jack.
Usage Features:
- Easy Connectivity: Simple connection via a single CAT cable for HDMI, IR, and power.
- Flexible Powering: Bi-directional PoH allows the system to be powered from either the transmitter or receiver end, reducing the need for multiple power outlets.
- Comprehensive IR Control: Enables control of source devices from the display location and display devices from the source location, enhancing user convenience.
- Robust Signal Transmission: Designed for optimal performance with TE CONNECTIVITY 1427071-6 EIA/TIA-568-B termination (T568B) of CAT5e/6 cables.
- Included Accessories: Supplied with Blustream IR receiver and emitters, a 12V/2A DC power supply for each unit (though only one may be needed due to PoH), mounting brackets, and a user manual.
- Surge Protection: It is highly recommended to use surge protection systems to protect sensitive electrical components from damage due to electrical spikes, surges, electric shock, or lightning strikes, thereby extending the equipment's life.
- Cable Recommendations: For optimal performance, use TE CONNECTIVITY 1427071-6 EIA/TIA-568-B termination (T568B) of CAT5e/6 cables.
- Interference Avoidance: To minimize interference, avoid running HDBaseT / Cat5e/6/6a cabling with or in close parallel proximity to mains power cables.
- Power Supply: Only use the enclosed 12V/2A DC power supply or a Blustream approved replacement.
- No Disassembly: Do not disassemble either the Transmitter or Receiver units, as this will void the manufacturer's warranty.
Maintenance Features:
- Cleaning: Clean the unit with a soft, dry cloth.
- Avoid Harsh Chemicals: Do not use alcohol, paint thinner, or benzene to clean the unit, as these can damage the device.
Need help?
To Next Page
General