ACM200 API DEVELOPMENT
09
contact support@blustream.co.uk / support@blustream.com.au
COMMAND DESCRIPTION COMMAND RESPONSE
Apply Config to Video Wall VW idx C cidx APPLY Apply config: Configuration cidx
Set Grouped Output from single Source INPUT:yyy VW idx C cidx G gidx FR yyy [SUCCESS] Done
Apply Single Screen Config to Video Wall HxV Location VW idx C cidx S HhhVvv [SUCCESS] Done
Set Single Screen HxV Output from single Source INPUT:yyy VW idx C cidx S HhhVvv FR yyy [SUCCESS] Done
ALL video wall status VWSTATUS (See status example at end of document)
Single Video Wall status VWidxSTATUS (See status example at end of document)
For full Video wall API commands including VW setup please see 'HELP COMMANDS' on page 17 of this manual.
Video wall configurations will be setup in the ACM200 Web GUI
Each video wall setup will include the following:-
• Video wall creation = Each Multicast system can include up to 9x seperate video walls (01-09)
• Configuration = Individual configurations of screens within a video wall. An example of a configuration would be all screens as-
signed as a single video wall, all screens configured as individual displays, multiple video walls configured within a larger video
wall (video wall groups – see below) (01-09)
• Groups = A video wall group is the ‘Grouping’ of Multicast receivers within a video wall allowing simplified source selection and
configuration recall of more than one Multicast Receiver at the same time (A-J)
Video Wall 1 Configuration 1 Video Wall 2 Configuration 2
Example of control commands
VW01C01APPLY (will apply video wall configuration 1 above to all Receivers)
VW01C02APPLY (will apply video wall configuration 2 above to all Receivers)
VW01C01GaFR002 (will apply video configuration 1 and switch all screens to Transmitter 002
VW01C02GbFR006 (will apply video configuration 1 and switch group b screens [orange] to Transmitter 006
When recalling video wall configurations the following applies:
Characters:
idx = [01...09] - Video Wall Index / Number
cidx = [01...09] - Config Index / Number
Video Wall Commands