Need help?Do you have a question about the BluStream Multicast ACM200 and is the answer not in the manual?
General| Brand | BluStream |
|---|---|
| Model | Multicast ACM200 |
| Category | Control Unit |
| Language | English |
Details the available communication ports: TCP/IP, Infrared (IR), and RS-232.
Explains controlling the ACM200 via TCP/IP, including default IP and port.
Details controlling the ACM200 via RS-232, including default settings.
Illustrates the network setup and CAT cable requirements for the ACM200.
Explains how to access the ACM200 web interface via its IP address and default login.
Introduces the setup wizard for configuring the Multicast system components.
Emphasizes the importance of correctly configured network switches for system operation.
Details two methods for adding transmitters and receivers to the system.
Explains automatically assigning IP addresses to devices by connecting them to the network switch.
Describes connecting devices one by one for sequential IP and ID assignment.
Details how to initiate a scan to find new Multicast devices on the network.
Explains how found devices populate the interface and the importance of labeling.
Describes naming devices, EDID settings, and using the 'View' button for preview.
Details the 'View' button's function for previewing transmitter streams and identifying units.
Explains scaler, refresh, receiver actions, OSD, and rebooting.
Covers finalizing setup, advanced options like video walls, and backing up configuration.
Explains using drag and drop to change source input for each display.
Lists signals that can be independently routed: Video, Audio, IR, RS-232, USB/KVM, CEC.
Explains fixing signals from one device to another, independent of video switching.
Explains configuring up to 9x video wall arrays, ranging from 1x2 to 9x9.
Details allocating receivers, defining screen layout, and creating templates.
Covers Back, Update Name, Screen Settings, Group Configurator, and Toggle OSD.
Explains using dropdowns to assign specific receivers to video wall screens.
States that firmware updates apply to the ACM200, transmitters, and receivers.
Guides on downloading and uploading the ACM200 firmware file.
Explains how to upload firmware files for TX/RX units via the ACM200.
Describes the process after uploading firmware, including device updates.
Provides steps to test ACM200 control and network connectivity.
Details steps to activate TFTP and Telnet client features in Windows.
Explains the need for the computer's IP to be in the same range as ACM200 LAN ports.
Details how to access Ethernet adapter properties.
Explains entering the correct IP, Subnet Mask, and Default Gateway.
Guides on opening the TCP/IPv4 properties window.
To Next Page
