ACM200 USER MANUAL
54 www.blustream.co.uk / www.blustream.com.au
Adjusting Your Computer Settings - Enabling TFTP & Telnet
Prior to using the Blustream ACM200 Firmware update PC program you must activate both TFTP and Telnet fea-
tures on the computer. This is achieved using the following steps below:
1. In Windows, navigate to: Start -> Control Panel -> Programs and Features
2. In the Programs and Features screen, select Turn Windows features on or o in the navigation bar on the
le.
3. Once the Windows Features window populates, scroll down and make sure “TFTP client” and “Telnet
Client” are both selected.
4. Once the progress bar fills and the pop up disappears, the TFTP client is enabled.
To Next Page
Loading...
Need help?
General