ACM200 USER MANUAL
17contact support@blustream.co.uk / support@blustream.com.au
Web-GUI - Preview
The Preview feature is a quick way to view the media being streamed through the Multicast system once configured.
Used to preview the stream from any HDMI source device into the Multicast Transmitter, or the stream being
received by any Receiver in the system concurrently. This is particularly helpful for debugging and checking source
devices are powered on and outputting a HDMI signal, or to check the I/O status of the system:
The Preview windows show a live grab of the media which automatically updates every few seconds. To select
the Transmitter or Receiver to preview, use the drop down box to select the individual Transmitter or Receiver to
preview.
To Next Page
Loading...
Need help?
General