02
contact support@blustream.co.uk / support@blustream.com.au
Surge protection device
recommended
This product contains sensitive electri-
cal components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems is highly
recommended in order to protect and
extend the life of your equipment.
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
The SP14AB is a HDMI 1:4 distribution amplifier which
splits a single DVI or HDMI audio/video source to four
identical HDMI outputs / displays. The SP14AB support
video resolutions from 1080p Full HD up to and including
4K@30Hz UHD and all 3D formats as well as multichan-
nel digital audio formats including Dolby® True HD and
DTS-HD® Master Audio™. An embedded audio extractor
can also extract the HDMI audio signal and output it via
a 3.5mm L/R analogue audio output and SPDIF coaxial.
(Only two channel PCM is supported on the analogue
audio breakout)
Introduction
• Supports resolutions up to 1080p@60Hz, 4K@30Hz,
36-bit deep colour
• Splits an HDMI source to 4 outputs without loss
• Extract the audio from HDMI source via analog and
digital
outputs.
• Dolby TrueHD and DTS-HD master audio pass through
to HDMI output
• Advanced EDID management for rapid integration of
sources and displays
• LEDs for power-on and outputs indication.
• Easy installation with rack-mounting ears
• Small compact size
• Full 3D pass through.
FEATURES:
To Next Page
Loading...
Need help?
General