BMC H-80 Series Quick Operation Manual

Respiratory High-flow Therapy Device H-80 Series Quick Operation Manual V2.0
2 / 2
Connect the accessories and power cord to the device, as shown in the Fig. 2-1:
A. Connect the patient end of the LH2 Heated Breathing Tube to the assembled nasal cannula.
B. Connect the machine end of the LH2 Heated Breathing Tube to the air outlet of the device firmly.
C. Connect the power cord to the AC inlet of the main device.
D. Plug the other end of power cord to the power outlet.
3. Adjusting Device Settings
Connect the power cord and LH2 Heated Breathing Tube properly, the screen displays the Main Interface shown in
the Fig. 3-1. Turn the Knob to switch among interfaces and options. Press the Knob to conduct parameters
setting and confirm options, as shown in the Fig. 3-2. After finishing adjusting device settings, return to the Main
Interface and press the Knob to start treatment.
Fig. 3-1
Fig. 3-2
4. Important Note
Before using the device, read all the information in the user manual and memorize the information related to correct
operation.

BMC H-80 Series Specifications

General

Brand	BMC
Model	H-80 Series
Category	Medical Equipment
Language	English