Installation and user manual – Dynamicroll® Frigo 2
6. MOVING
The machine must be moved considering the weight and the possible movements that it could have during the
movement. Use proper lifting and transporting devices for equipment. Check the position of the forks according
to the center of gravity of the machine. Before starting installation, check the integrity of the product.
7. LABELS
NOTE: Labels are an integral part of the use and maintenance manual. Always check the presence of labels and
provide for replacement in case of removal or wear (unreadable labels).
8. TECHNICAL SPECIFICATIONS
CE Marking and position
Wind class identification
Univocal serial number identification
Construction year identification
Power supply identification
CE marking is inside control panel
To Next Page
Loading...