BMPRO BatteryPlus35SR - Installation Guide Manual

INSTALLATION GUIDE
+ RVView
BatteryPlus35
Make sure there is
adequate external
ventilation to or
a larger internal
cavity. Remove
battery if access is
required.
1
Mount securely to
a suitably strong
surface, using four
pre-drilled holes.
2
Install RVView where
it won’t be subject
to water or liquids.
Drill a 25mm hole to
fit the data cable to
the RVView. Connect
BatteryPlus35 with
the data cable.
3
Mount the RVView
(screws provided)
then remove clear
protective plastic
from the front cover.
4