Need help?Do you have a question about the BMW Motorrad Plus battery charger and is the answer not in the manual?
General| Brand | BMW Motorrad |
|---|---|
| Model | Plus battery charger |
| Category | Battery Charger |
| Language | English |
Read these instructions before first use for important operational information.
Defines hazard warnings (Caution, Warning, Danger) and common symbols used in the manual.
Lists compatible battery types (lead-acid, lithium-ion) and motorcycle technologies (CAN bus).
Describes the automatic charging process, continuous monitoring, and long-term connection.
Details the charger's built-in protection against short circuit, reverse polarity, and overload.
Instructions for cleaning the charger using a dry, lint-free, anti-static cloth.
Advises against domestic disposal and recommends taking it to an electrical waste collection center.
Identifies key components of the battery charger, including display, buttons, and cables.
Explains the status indicated by the POWER, FULL, and ERROR LEDs on the charger.
Steps to connect the charger to power and the initial functional check before operation.
Guide to navigating the menu using buttons to adjust settings and confirm selections.
Procedure to access the language menu and choose from available languages.
How to select the appropriate charging mode for lead-acid or lithium-ion batteries.
Steps for connecting the charger to the vehicle or battery terminals.
How the display shows charging status, progress bar, percentage, current, and voltage.
Explanation of temporary charging pauses due to vehicle electronics and automatic resumption.
Details continuous battery maintenance charging and monitoring after the primary charge is complete.
Troubleshooting steps for the ERROR LED and 'Charging error' message.
Addresses issues of incomplete charging, often related to accessory power draw.
Procedure and warnings for recharging deeply discharged batteries, including potential limitations.
Specific safety and charging procedures for lithium-ion batteries that are deeply discharged.
Diagnosing starting issues when the charger indicates battery maintenance but the motorcycle won't start.
Reasons for the ERROR LED illuminating, such as connection to a battery with an incorrect voltage.
Provides technical specifications for line voltage, charging voltage, and maximum charge current.
Lists general technical specifications, including weight and cable lengths.
To Next Page