Need help?Do you have a question about the BMW Motorrad R 1200 GS 2012 and is the answer not in the manual?
General| Displacement | 1, 170 cc |
|---|---|
| Transmission | 6-speed |
| Final Drive | Shaft drive |
| Tire Front | 110/80 R19 |
| Tire Rear | 150/70 R17 |
| Bore x Stroke | 101 mm x 73 mm |
| Compression Ratio | 12.0:1 |
| Fuel System | Electronic fuel injection |
| Fuel Type | Premium unleaded |
| Engine Type | Air/oil-cooled flat twin (boxer), four-stroke |
| Power | 110 hp (81 kW) at 7, 750 rpm |
| Torque | 120 Nm at 6, 000 rpm |
| Front Suspension | Telelever, central spring strut |
| Rear Suspension | Paralever with monoshock |
| Front Brakes | Dual 305 mm discs, 4-piston calipers |
| Rear Brakes | Single 265 mm disc, 2-piston caliper |
| ABS | Yes, BMW Motorrad ABS |
| Seat Height | 850 mm |
| Wheelbase | 1507 mm (59.3 in) |
| Fuel Capacity | 20 liters |
| Gearbox | 6-speed constant mesh |
| Front Wheel Travel | 190 mm |
| Rear Wheel Travel | 200 mm |
| Weight (Wet) | 229 kg |
| Clutch | Single dry plate clutch, hydraulically operated |
Explains the manual's structure and its importance for owners.
Defines symbols used for warnings, instructions, and references.
States that technical data adheres to DIN standards but may vary by country.
Identifies components on the left side of the motorcycle.
Identifies components on the right side of the motorcycle.
Details the controls on the left handlebar switchgear.
Details the controls on the right handlebar switchgear.
Locates key components and documents stored under the seat.
Identifies and explains the gauges and indicators on the instrument panel.
Explains the various readouts and displays on the motorcycle's dashboard.
Details the interpretation of various symbols and warnings on the display.
Explains the function of different warning and indicator lights.
Describes how the motorcycle indicates when service is required.
Explains how the motorcycle calculates and displays the remaining riding range.
Describes ambient temperature display and its relation to ice warnings.
Explains how tyre pressure is monitored and displayed.
Details how to check and interpret the engine oil level indicator.
Provides an overview of how different warnings are presented.
Explains how to use the ignition switch and lock the handlebars.
Details the function and security aspects of the electronic immobiliser system.
Instructions on how to set and adjust the motorcycle's clock.
Explains how to select and view different readings on the instrument panel.
Operation of low-beam, high-beam, and parking lights.
How to operate the turn signal indicators and hazard warning flashers.
Function and safe operation of the engine kill switch.
How to operate the heated handlebar grips.
Deactivating and activating the ABS system.
Operation and settings for the Automatic Stability Control system.
Instructions for adjusting the clutch lever and checking fluid level.
How to adjust brake levers and general brake operation.
Instructions for adjusting the mirrors.
How to adjust the windscreen for rider comfort.
Adjusting handlebar reach and position.
Adjusting spring preload for front and rear suspension.
Adjusting suspension damping for various riding conditions.
How to use the ESA system to adjust suspension settings.
Checking tyre pressure and general tyre maintenance.
Adjustment of headlight beam throw for different riding conditions.
Procedures for removing and installing the front and rear seats.
Crucial safety advice for riders, including protective gear and riding practices.
A pre-ride checklist of essential functions and wear limits to verify.
Procedures for starting the engine, including cold starts and potential issues.
Guidelines for the initial break-in period of the motorcycle.
Advice for riding the motorcycle off-road, including tyre and suspension considerations.
Explains braking techniques, wet/dirty brakes, and descending mountain passes.
Instructions for parking the motorcycle using the side and centre stands.
Procedures and safety precautions for refuelling the motorcycle.
Guidance on safely strapping the motorcycle for transport.
Explains the functionality and operation of the integrated ABS system.
Details how the ASC system manages engine torque for stability.
Explains the RDC system for monitoring tyre pressure.
How to use the ESA system to adjust suspension settings.
Guidelines for using BMW-approved parts and accessories.
Information on using the motorcycle's power sockets and their limitations.
How to open, close, adjust, and remove the side cases.
Instructions for opening, closing, adjusting, and removing the topcase.
Details on removing and installing the luggage carrier and platform.
Overview of maintenance procedures, torque values, and professional service recommendations.
Lists the standard tools provided with the motorcycle and their uses.
Instructions for checking and topping up the engine oil level.
Procedures for checking brake operation, pads, and fluid levels.
Step-by-step guide for replacing various headlight, parking, and turn indicator bulbs.
How to remove and install the air filter for maintenance.
Instructions for jump-starting the motorcycle's battery safely.
Maintenance, charging, and replacement procedures for the motorcycle battery.
Recommendations for cleaning and care products for the motorcycle.
Guidelines for washing the motorcycle, including road salt and high-pressure warnings.
Specific instructions for cleaning stainless steel, plastics, body panels, and lights.
Advice on maintaining the paintwork against environmental damage.
Procedures for preparing the motorcycle for storage.
Steps to take after laying up the motorcycle before riding again.
A guide to diagnose and resolve common engine starting issues.
Specifications for torque values of various threaded fasteners.
Detailed specifications of the motorcycle's engine design and performance.
Recommended fuel grades, capacity, and reserve fuel information.
Specifications for engine oil types, viscosity, and capacity.
Technical details on brake types and pad materials.
Information on recommended tyre sets, sizes, and pressures.
Technical data related to the motorcycle's electrical system, battery, and lighting.
Key physical dimensions of the motorcycle.
Specifications for unladen weight, gross weight, and payload.
Overview of BMW's global service network and authorized dealerships.
Information on roadside assistance and other mobility services.
Details on pre-delivery checks and general maintenance responsibilities.
Forms for recording pre-delivery and running-in checks.
A table for recording service history and details.
To Next Page