3. "Show current version"
Select desired version* to display additional in‐
formation*.
Update software via USB
Do not attempt to update the software unless
the vehicle is at a standstill.
1. Store the file for the software update onto a
USB data store in the main folder.
2. Connect the USB storage device to the USB
interface of the USB audio interface in the
centre arm rest. Updating via the USB inter‐
face in the glove box is not possible.
3. "Settings"
4. "Software update"
5. "Update software"
6. If applicable, "USB"
7. "Start update"
8. "OK"
All the updates listed are installed.
Update software via BMW
TeleServices*
Do not attempt to update the software unless
the vehicle is at a standstill.
1.
Switch on ignition.
2. "Settings"
3. "Software update"
4. "Update software"
5. "BMW TeleServices"
6. If applicable, "Start update"
7. "Start update"
8. "OK"
All the updates listed are installed.
To interrupt update: "Cancel".
Restore previous version
If necessary, the software can be restored to the
status prior to the most recent software update.
Do not attempt to restore the previous version
of the software unless the vehicle is at a stand‐
still.
1. "Settings"
2. "Software update"
3. "Restore previous version"
4. "OK" select twice.
All the updates listed are removed.
Note
During a software update or when restoring the
previous version, BMW Services*, Office func‐
tions* and associated devices are not available
for a short time. Wait a few minutes until availa‐
bility is restored.
Seite 184
184
Online Edition for Part no. 01 40 2 607 643 - 07 11 490
CD/multimedia
To Next Page
Loading...
Need help?
General
