Technical data
Vehicle features and options
This chapter describes all standard, country-
specific, and optional equipment offered with
the series. It also describes features and func-
tions that are not necessarily available in the
vehicle, e.g., due to the selected options or
country versions. This also applies to safety
functions and systems. When using these
functions and systems, the applicable laws
and regulations must be observed.
General information
The technical data and specifications in the
Owner's Manual are used as guidance values.
Vehicle-specific data may deviate from this,
for instance due to the optional equipment
chosen, national-market version, or country-
specific measuring process. More specific val-
ues can be obtained in approval documents,
on the vehicle info label, or from an authorized
service center or another qualified service cen-
ter or repair shop.
Dimensions
The dimensions can vary depending on the
model version, equipment version or country-
specific measurement procedure.
The height of the vehicle can also differ, e.g.,
due to tires and vehicle load.
BMW 2 Series Gran Coupe
Width with mirrors in/mm 81.9/2,081
Width without mirrors in/mm 70.9/1,800
Height in/mm 55.9/1,420
Length in/mm 178.5/4,534
Wheelbase in/mm 105.1/2,670
Turning radius diameter ft/m 37.4/11.4
Seite 330
REFERENCE
Technical data
330
Online Edition for Part no. 01405A89334 - VI/23
To Next Page
Loading...
Need help?
General
