2. "Vehicle status"
Overview of information shown
Symbols Description
"Flat Tyre Monitor": status of the
runflat indicator, see page 353.
"Tyre Pressure Monitor": status
of the Tyre Pressure Monitor,
see page 346.
"Engine oil level": Electronic oil
measurement, see page 370.
"AdBlue": BMW Diesel with
BluePerformance, see
page 365.
"Check Control messages": to
display saved Check Control
messages, see page 162.
"Service requirements": to dis‐
play service requirements, see
page 167.
"Teleservice Call": Teleservice
Call.
Head-Up Display
Principle
The system projects important information, for
example the speed, into the driver's field of vi‐
sion.
The driver can register this information without
having to divert attention from the road.
General
Follow the instructions on cleaning the Head-Up
Display.
Overview
Switching on/off
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Head-up display"
Display
Overview
The following information is displayed in the
Head-Up Display:
▷ Speed.
▷ Navigation instructions.
▷ Check Control messages.
▷ Selection list in the instrument cluster.
▷ Driver Assistance Systems.
▷ Sport displays.
Some of this information is only shown briefly
when needed.
Selecting displays in the Head-Up
Display
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
Seite 174
CONTROLS
Displays
174
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
