4. "Head-up display"
5. Select the desired setting.
The setting is saved for the current driver profile.
Adjusting the brightness
The brightness is automatically adapted to the
ambient light.
The basic setting can be adjusted manually.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Brightness"
6. Turn the Controller until the desired bright‐
ness is obtained.
7. Press the Controller.
The brightness of the Head-Up Display can also
be adjusted with the instrument lighting if the
low-beam headlights are switched on.
Adjusting the height
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Height"
6. Turn the Controller until the desired height is
obtained.
7. Press the Controller.
The setting is saved for the current driver profile.
The height of the Head-Up Display can also be
saved with the memory function.
Adjusting the rotation
The Head-Up Display view can be rotated.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. "Rotation"
6. Turn the Controller until the desired setting is
reached.
7. Press the Controller.
Additional settings
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Displays"
4. "Head-up display"
5. Select the desired setting:
▷ "Speed Assistant": call up settings for
speed assistance.
▷ "Display infotainment lists in": set whether
the selection lists are displayed in the in‐
strument cluster or in the Head-Up Dis‐
play.
▷ "Sport displays": show revolution counter
and shift lights in the Head-Up Display.
▷ "Off": the sport displays are not shown
in the Head-Up Display.
▷ "In SPORT mode": the sport displays
are only shown in the SPORT driving
mode.
▷ "Always": the sport displays are per‐
manently shown in the Head-Up Dis‐
play.
▷ "Reduced height": if some of the informa‐
tion is not in the driver's field of view, the
information can be displayed in the lower
part of the Head-Up Display.
Seite 175
Displays
CONTROLS
175
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
