▷ "Park Assist".
▷ "Reversing Assistant".
▷ "Camera picture"
▷ "Brightness".
▷ "Contrast".
▷ "Parking guide lines".
▷ "Obstacle mark.".
▷ "Settings": to perform settings, for exam‐
ple to use the activation points with Panor‐
ama View.
Toolbar, left
It is possible to select various views directly using
the function bar on the left. To do this, tilt the
Controller to the left if necessary.
▷ "Car wash".
▷ "Parking": around the vehicle.
▷ "3D view": free camera.
▷ "Tow hitch".
Assistance functions
General
A number of assistance functions can be active
simultaneously.
The following assistance functions can be activa‐
ted manually:
▷ "Parking guide lines".
▷ "Obstacle mark.".
▷ "Tow hitch".
▷ "Car wash".
The following assistance functions are shown
automatically:
▷ Flank protection.
▷ Door opening angle.
Parking guidance lines
Driving path lines
The driving path lines help you to estimate the
space required when parking and manoeuvring
on a level road surface.
The driving path lines are dependent on the
steering angle and are continuously adapted to
the steering wheel movements.
Turning circle lines
The turning circle lines can only be shown in the
camera image together with driving path lines.
The turning circle lines show the trajectory of the
smallest possible turning circle on a level road
surface.
Once the steering wheel has been turned be‐
yond a certain angle, only one turning circle line
is displayed.
Seite 265
Driver Assistance Systems
CONTROLS
265
Online Edition for Part no. xxx - VI/19
To Next Page
Loading...
