Replacing parts
134
2. Loosen the bulb holder with clip, see arrow,
and pull out.
3. Press the bulb in slightly and turn to the left,
take out and change it.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the luggage area.
Lights in the luggage compartment lid/
tailgate
Saloon
1. Pry out the plastic plugs in the trim of the
luggage compartment lid using a screw-
driver and remove the trim.
2. Unfasten the bulb holder with clip, see
arrow, and remove.
3. Press the bulb in slightly and turn to the left,
take out and change it.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the trim of the luggage compart-
ment lid.
Touring
1. Press out one side of the cover at the clips
using a screwdriver, see arrows, and fold
the cover downward.
2. Fold back the foam insulating material.
3. Loosen the bulb holder with clip, see arrow,
and remove.
4. Press the bulb in slightly and turn to the left,
take out and change it.
5. Re-engage the bulb holder so that it audibly
clicks into place.
6. Reattach the trim of the tailgate.
Licence plate lights
C5W bulb, 5 watts
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
To Next Page
Loading...
