Driving
50
Flashing turn indicators/
headlight flasher
1 High-beam headlights
2 Headlight flasher
3 Flashing turn indicators
Indicating a turn
Push the lever past the pressure point.
To cancel the flashing turn indicators, press the
lever as far as the pressure point.
Unusually rapid blinking of the indicator
light signifies failure of a turn signal – pos-
sibly on a trailer being towed, if applicable.<
Indicating a turn briefly
Press the lever as far as the pressure point and
hold it there for as long as you wish to indicate a
turn.
Triple turn signal
Press the lever as far as the pressure point.
The turn indicators flash three times.
You can activate or deactivate this function.
1. Switch on the ignition, see page 45.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol and the word "SET" are displayed.
3. Press button 2.
4. Lightly push button 1 in the turn indicator
lever down repeatedly until the symbol is
displayed.
5. Press button 2.
6. Press button 1 to select:
>
Turn indicators flash once.
>
Triple turn signal.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
To Next Page
