BMW 325xi - Windshield wiper blades

136
Replacement procedures
Onboard tool kit
The onboard tool kit is located in the
luggage compartment lid.
Loosen the wingnut to open.
Windshield wiper blades
1. Switch off the engine
2. Fold the wiper arm completely out
from the windshield
3. Position the wiper blade at an angle
and pull the release spring – see
arrow
4. Fold the wiper blade down and
unhook it toward the windshield
5. Pull the wiper blade past the wiper
arm toward the top
6. Insert a new wiper blade and apply
pressure until you hear it engage.
Online Edition for Part-No. 01 41 0 156 804 - © 09/02 BMW AG