Technical data
Vehicle equipment
This chapter describes all standard, country-spe‐
cific and optional equipment available for the
model series. It may therefore describe equip‐
ment and functions which are not installed in
your vehicle, for example on account of the spe‐
cial equipment selected or the country specifica‐
tion. This also applies to safety-relevant func‐
tions and systems. Please comply with the
relevant laws and regulations when using the
corresponding functions and systems.
General
The technical data and specifications in the
Owner's Handbook are reference figures. Data
relating to a specific vehicle can deviate from
this, for example, due to selected optional equip‐
ment, national-market versions or country-spe‐
cific measurement methods. Detailed values can
be found in the permit documents, on informa‐
tion plates on the vehicle or can be requested
from a Service Partner of the manufacturer or an‐
other qualified Service Partner or a specialist
workshop.
The information in the vehicle documents always
takes precedence over the information in the
Owner's Handbook.
Dimensions
Dimensions can vary depending on the model
version, equipment or country-specific measure‐
ment method.
The heights specified do not take into account
add-on parts such as a roof aerial, roof railing or
spoiler. The heights can deviate, for example,
due to selected optional equipment, tyres, loads
and suspension design.
BMW 3 Series Touring plug-in hybrid
Width with mirrors mm (in) 2068 (81.4)
Width without mirrors mm (in) 1827 (71.9)
Height mm (in) 1442 (56.8)
Length mm (in) 4709 (185.4)
Wheelbase mm (in) 2851 (112.2)
Smallest turning circle dia. m (ft) 12.0 (39.4)
Seite 428
REFERENCE
Technical data
428
Online Edition for Part no. 01405A1EA53 - X/20