99n
OverviewControlsMaintenanceMinor repairsDataKeywords
Telephone operation via MID
*
Keep the left of the key pressed down,
the entire number is deleted.
Memorising phone numbers:
Press the right of the key.
Call up the number directly from the
memory:
Press and then, to dial
,
Press the left of the key.
C
CLR SET
C
SET
C
NOTE PAD
Additional functions
You can call up the following informa-
tion from all telephone functions:
>
Reception signal
>
Call charges and
>
Call duration (assuming that charges
have been selected)
>
Reading SMS messages.
Press the right of the key.
The following appears in the display:
Press the left of the key.
The following appears in the display:
The reception signal is always displayed
first after a number has been dialled.
3:42PM
MEMORY NUMBER DIR. NOTE PAD SOS
SIGNAL: 3:42PM
METER TIMER SMS
To call up the charge display:
The individual charge for the current
call and the total charge are displayed.
To call up duration of call:
The duration of the current call is
displayed. By pressing the SIGNAL key,
the reception signal is shown again.
To return to the initial function:
Press the right of the key.