Controls
109
Reference OverviewDriving hintsCommunication NavigationEntertainmentMobility
5. Select "Indep. ventil." or "Aux. heating" and
press the controller.
The independent ventilation control is
on.
LED on the automatic air conditioning
system flashes.
6. To switch off, select "Indep. ventil." or "Aux.
heating" again and press the controller.
Preselecting the switch-on time
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "Climate".
3. If necessary select symbol and press the
controller to proceed to the other page of
the menu.
4. Select "Stationary" and press the control-
ler.
5. Select "Set time 1" or "Set time 2" and
press the controller.
6. Enter the desired time:
> Turn to make the adjustment.
> Press the controller to apply the setting.
Activating the switch-on time
iDrive, principle, see page 14.
1. Press the button to call up the start
menu.
2. Move the controller towards "Climate".
3. If necessary select symbol and press the
controller to proceed to the other page of
the menu.
4. Select "Stationary" and press the control-
ler.
5. Select "Switch. time 1" or "Switch. time 2"
and press the controller.
The switch-on time is activated.
LED on the automatic air conditioning sys-
tem is lit.
LED on the automatic air conditioning sys-
tem flashes when the system has cut in.
The independent ventilation control will
only be switched on within the next
24 hours. After this, the time must be confirmed
again.<
Independent air
conditioning*
The independent air conditioning starts the
engine while the car is locked via the remote
control circuit for independent functions, and
activates the automatic air conditioning's
AUTO program. The temperature of the interior
is lowered to approx. 226/727 via the air vol-
ume.
The adjustable outlets for the upper body area
should be open, see page 106.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG
To Next Page
Loading...
