BMW 730i - Page 45

Controls
43
Reference OverviewDriving hintsCommunication NavigationEntertainmentMobility
Adjusting Comfort seat at the rear*
You can adjust the functions that you have
selected with the buttons at the control knob.
1 Longitudinal direction:
Angle:
Seat back:
This button is active by default.
2 Lumbar support, see Adjusting lumbar sup-
port
3 Shoulder support:
Height of the head restraint:
Seat back:
If the safety switch for the electric win-
dows has been pressed, see page 38, the
Comfort seats cannot be adjusted.<
Adjusting front passenger's seat from
the rear
You can adjust the front passenger's seat from
the rear, e.g. to obtain more leg room at the rear.
Press the button, see arrow, to activate the
function.
You can adjust the functions that you have
selected with the buttons at the control knob.
1 Longitudinal direction:
Height:
Angle:
2 Height of head restraint:
Seat back:
Press the button again, see arrow, to deactivate
the function.
Adjusting basic position
The basic position of the rear seats can be
adjusted with the button. Press the button until
the seat adjustment process is finished.
It may be necessary to restore the seat's
basic position e.g. if fitting a child restraint
system, see page 52.<
Seat, mirror and steering
wheel position memory*
You can memorise and call up two different
positions for the driver's seat, outside mirrors
and steering wheel.
On Comfort seats, you can additionally memo-
rise and call up two seat positions for each fur-
ther seat.
The lumbar support setting is not stored in the
position memory.
Online Edition for Part no. 01 41 0 013 197 - © 02/07 BMW AG