62n
Child restraint installation Child-safety locks
To allow you to use the safety belts to
secure child-restraint systems, the
belts at all rear positions feature a spe-
cial locking mode.
A label with operating instructions is at-
tached to the belt next to the latch plate
(except the middle belt in the rear).
Lock the safety belt
Extract the entire length of the belt from
the inertia reel mechanism. Allow the
belt to retract somewhat and engage
the buckle. Then tighten the belt around
the child restraint. The belt is now
locked. Comply with the instructions
provided by the manufacturer of the
child restraint.
365us146
Unlock the safety belt
Release the safety belt, remove the
child's seat and retract the safety belt
to its end position on the belt retractor.
Insert the key into a rear door lock and
turn it outward:
The door can now be opened from the
outside only.
To Next Page
Loading...
Need help?
General
