Workshop Exercise - RHT Service
With instructor guidance, prepare to remove complete roof
module and rear module assembly. Follow the latest repair
instructions in TIS.
First, remove rear module assembly. Be sure to mark mounting
locations to ensure proper position during re-assembly.
Make sure to protect rear module and trunk from body damage
using fender covers or other suitable protection.
Once the rear module is removed, place in safe location away
from the vehicle to allow access by special tool (engine crane).
Mark mounting locations on rear module mount.
List the tool number for the special tools shown below:
90
E93 Complete Vehicle Workbook
Tool #:
Tool #:
To Next Page
Loading...
