BMW F 700 GS User Manual

Press and hold down button 1
until the ABS warning light
changes status.
ABS telltale and warning
light shows.
with Automatic Stability Control
(ASC)
OE
Initially, the ASC symbol
changes status. Press and
hold down button 1 until the
ABS warning light responds.
Under these circumstances
there is no change in the ASC
setting.
Release button 1 within two
seconds.
ABS telltale and warning
light remains on.
The ABS function is deactiv-
ated.
Activate ABS function
Press and hold down button 1
until the ABS warning light
changes status.
ABS telltale and warning
light goes out; if self-
diagnosis has not completed it
starts flashing.
Release button 1 within two
seconds.
ABS telltale and warning
light remains off or contin-
ues to flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
NOTICE
An ABS fault has occurred if the
ABS telltale and warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
BMW Motorrad ASC
with Automatic Stability Control
(ASC)
OE
Deactivate ASC function
Switch on the ignition.
4
49
z Operation

BMW F 700 GS Specifications

General

Displacement	798 cc
Power	75 hp (55 kW) at 7, 300 rpm
Torque	77 Nm (57 lb-ft) at 5, 300 rpm
Fuel System	Electronic fuel injection
ABS	Standard
Engine Type	Liquid-cooled, 4-stroke, in-line two-cylinder
Transmission	6-speed
Seat Height	820 mm (32.3 in)
Fuel Capacity	16 liters (4.2 gal)
Weight	209 kg
Front Suspension	Telescopic fork
Rear Suspension	Cast aluminum dual swing arm
Front Brake	300 mm
Rear Brake	Single disc, 265 mm