Need help?Do you have a question about the BMW G14 and is the answer not in the manual?
General| Brand | BMW |
|---|---|
| Model | G14 |
| Category | Automobile |
| Language | English |
Explains the use of symbols in the document for better comprehension and to draw attention to important information.
Details vehicle requirements and potential discrepancies between document content and training course vehicles.
Lists other available resources for further information on individual topics.
Introduces the G14 convertible, highlighting its luxury, sportiness, and advanced technology.
Presents the exterior dimensions of the G14 model with a diagram and table.
Compares the silhouette and key technical data of the G14 with the G15.
Details the vehicle curb weights and payloads for the G14 model.
Lists the models available at market introduction with engine specifications.
Details the materials used in the G14's lightweight body concept, including steel, aluminum, and carbon.
Explains measures taken to increase body rigidity, including braces and rollover protection.
Explains the role of additional cross-struts in increasing body rigidity and preventing distortion.
Describes the active rollover protection system, its detection, and activation mechanism.
Illustrates the materials used for the outer body skin with a color-coded diagram.
Describes the aluminum shell design of the G14 doors and their components.
Highlights the importance of correct side window adjustment for leak-tightness and quiet operation.
Presents the components of the G14 tailgate with an exploded view diagram.
Provides an overview of the G14's interior equipment with a labeled diagram.
Describes the electrically-adjustable front seats, comfort access, and optional neck warmer.
Details the rear seats, including built-in headrests and folding capabilities.
Provides an overview of the soft top system components with diagrams.
Illustrates the main components of the soft top system, including cover, frame, and lid.
Details the mechanical components of the convertible top frame and its kinematics.
Explains the appearance, construction, and coordination of the convertible top compartment lid.
Details the kinematics of the convertible top lid, including locking mechanisms and adjustments.
Explains the adjustable compartment floor and its effect on trunk volume.
Provides an overview of the hydraulic components, cylinders, and units for the soft top.
Details the valve switching logic for opening and closing the soft top.
Lists the key electrical components involved in the soft top function.
Shows the location of the convertible top button, CVM, and electric drives.
Explains how sensors monitor the soft top's movement and signal the CVM.
Details the hall effect sensors for the front convertible top mechanism.
Details the hall effect sensors for the rear convertible top mechanism.
Presents the system wiring diagram for the Convertible Top Module (CVM).
Details the soft top fabric variants and the fixed rear window.
Explains the headlining attachment using retaining clips, springs, and a zip system.
Describes the operation and function of the convertible soft top.
Lists the conditions required before the convertible top can be opened or closed.
Describes the standard operation of the soft top using the convertible top button.
Illustrates the step-by-step procedure for opening the soft top.
Illustrates the step-by-step procedure for closing the soft top.
Provides important notes and procedures for servicing the soft top.
Details the adjustment procedures for the soft top bearings in different directions.
Describes the basic procedure for manually closing the fabric soft top.
To Next Page
