BMW M340i G20 xDrive User Manual

5/28/22, 10:13 AM
Removing and installing/replacing the headlining (equipment specification without slide/tilt sunroof)
https://www.newtis.info/tisv2/a/en/g20-m340i-xdrive-lim/repair-manuals/51-body-equipment/51-44-headlining/1VncysQyIM
1/38
BMW G20 M340i xDrive Sedan / Repair Manuals and Technical Data / 51 Body equipment / 51 44
Headlining /
51 44 001 Removing and installing/replacing the headlining
(equipment specification without slide/tilt sunroof)
If the headlining is folded, it may have to be replaced.
The following procedure forms the basis for these repair instructions and must be observed
without fail.
For more information see: 51 31 ... General procedure for disassembly/installation of bonded
window glass
Perform window removal using the "spider".
For additional information see: 51 31 ... Window glass removal using "spider"
PRELIMINARY WORK
1 – Removing the trim panel for the rear left and right water channel
Description is for left component only. Procedure on the right side is identical.
Fold the headlining.
Carry out tasks with a second person to assist.
Support the headlining at the front and back.

BMW M340i G20 xDrive Specifications

General

Brand	BMW
Model	M340i G20 xDrive
Category	Automobile
Language	English

Summary

PRELIMINARY WORK

1 - Removing the trim panel for the rear left and right water channel

2 – Removing the covers for the interior mirror

3 - Remove both A-pillar trim panels

Instructions for detaching and removing both A-pillar trim panels.

4 - Remove both sun visors

5 – Remove both counter supports for the sun visors

8 - Removing the roof function centre (FZD)

Steps to carefully detach and remove the roof function centre module.

11 - Removing both B-pillar trim panels

Instructions for removing the B-pillar trim panels from both sides.

12 - Remove both C-pillar trim panels

13 – Removing the trim of the additional brake light

14 – Remove additional brake light

15 - Remove rear window

Steps for safely removing the rear window assembly from the vehicle.

MAIN WORK

16 - Remove headlining

Detailed procedure for removing the headlining from the vehicle body.

17 – Fit the roof lining

Instructions for correctly installing the new or repaired roof lining.

POSTPROCESSES

19 - In case of reusing the rear window

20 - Install the rear window

Procedure for bonding and installing the rear window onto the vehicle body.