Replacing components
Vehicle features and options
This chapter describes all standard, country-spe‐
cific and optional features offered with the series.
It also describes features that are not necessarily
available in your vehicle, e. g., due to the selected
options or country versions. This also applies to
safety-related functions and systems. When us‐
ing these functions and systems, the applicable
laws and regulations must be observed.
Wiper blades
Safety information
NOTE
The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold the
wiper firmly when changing the wiper blade. Do
not fold or switch on the wiper without a wiper
blade installed.
Replacing the front wiper blades
1.
To change the wiper blades, fold up the wiper
arms, refer to page 112.
2. Fold up the wipers.
3. Position the wiper blade in a horizontal posi‐
tion.
4. Remove the wiper blade toward one side.
5. Insert the new wiper blade in reverse order of
removal until it locks in place.
6. Fold down the wipers.
Replacing the rear wiper blade
1.
Fold up the wiper arm.
2. Turn the wiper blade all the way back.
3. Continue turning the wiper blade all the way
so that it pops out of the holder.
4. Press the new wiper blade into the holder un‐
til you hear it snap into place.
5. Fold the wipers in.
Seite 251
Replacing components
MOBILITY
251
Online Edition for Part no. 01402989267 - II/18
To Next Page
