Folding down the head restraint
Only fold the head restraint back if no one will be
sitting in the seat in question.
▷ To the back: press the button, arrow 1, and
fold the head restraint back, arrow 2.
▷ Forward: fold the head restraint toward the
front as far as it will go. Make sure that the
head restraint engages correctly.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1.
Fold down the rear seat backrest, refer to
page 189.
2. Raise the head restraint up against the resist‐
ance.
3. Press the button, arrow 1, and pull the head
restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
Safety information
WARNING
Objects reflected in the mirror are closer than
they appear. The distance to the traffic behind
could be incorrectly estimated, for instance
while changing lanes. There is a risk of an acci‐
dent. Estimate the distance to the traffic behind
by looking over your shoulder.
Overview
1 Settings
2 Selecting a mirror, Automatic Curb Monitor,
automatic cornering adjustment
3 Folding in and out
Selecting a mirror
To change over to the other mirror:
Slide the switch.
Seite 93
Seats, mirrors, and steering wheel
CONTROLS
93
Online Edition for Part no. 01402989267 - II/18
To Next Page
Loading...
