Filling the tire with sealant
1. Shake the sealing container.
2. Take the connection hose completely out
of the compressor housing. Do not kink the
hose.
3. Attach the connection hose to the connec‐
tor of the sealing container, ensuring that it
engages audibly.
4. Slide the sealing container upright into the
holder on the compressor housing, ensur‐
ing that it engages audibly.
5. Screw the connection hose onto the tire
valve of the defective wheel.
6. With the compressor switched off, insert
the plug into a power socket inside the ve‐
hicle.
Seite 179
Wheels and tires Mobility
179
Online Edition for Part no. 01 40 2 960 865 - II/15
To Next Page
Loading...
