EasyManua.ls Logo

BMW i7 - Page 122

BMW i7
404 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mounts for lower anchors
General information
The lower anchors may be used to attach the
CRS to the vehicle seat up to a combined child
and CRS weight of 65 lbs/30 kg when the child
is restrained by the internal harnesses.
Safety information
Warning
If the lower anchors on child restraint system
are not engaged correctly, the child restraint
system will not be able to provide suitable
protection. There is a risk of injury or danger
to life. Make sure that the lower mountings
are correctly engaged and that the child re-
straint system fits securely against the back-
rest.
Warning
The mounts for the lower mountings and at-
tachment points of the child restraint system
are intended for attaching child restraint sys-
tems only. If other objects are attached, the
mounts or attachment points can be dam-
aged. There is a risk of injury or risk of dam-
age to property. Only attach child restraint
systems at the corresponding mounts for the
lower mountings or attachment points.
Position
Icon Meaning
The corresponding icon shows
the mounts for the lower
LATCH anchors.
Seats equipped with lower
mountings are marked with a
pair (2) of LATCH icons.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower mountings of
standard outer LATCH posi-
tions to fasten a child restraint
system on the middle seat.
Use the vehicle seat belt in-
stead for the middle seat.
Before attaching child restraint
systems
Pull the seat belt away from the area of the
child seat mountings.
Installing child restraint systems
1.
Mount child restraint system, see manufac-
turer's information.
2. Make sure that the child restraint system
mount is correctly engaged in the lower an-
chor on both sides.
With comfort rear seats: installation
of child restraint systems
To mount the child restraint system in the rear,
set the standard position. The function is oper-
ated via BMW Touch Command.
1.
"Seats"
2. "Adjustment"
3. "Reset"
When the desired position is reached, a
message is displayed:
Seite 122
CONTROLS
Transporting children safely
122
Online Edition for Part no. 01405A88D67 - VI/23

Related product manuals