BMW i7 - Page 151

cle icon goes out if no vehicle has been de-
tected ahead of you.
Indicator lamp is flashing: vehicle ahead is
driving off.
Additional information:
Distance control, refer to page 224.
Speed Limit Assist
The detected speed limit can be ap-
plied with the SET button. As soon as
the speed limit has been applied, a
green checkmark is displayed.
Additional information:
Speed Limit Assistant, refer to page 238.
Assisted Driving Mode
The system supports the driver in
keeping the vehicle within the lane.
Additional information:
Assisted Driving Mode, refer to page 230.
Lane Change Assistant: lane change in
progress
Arrow icon for lane change green: the
system carries out a lane change.
Additional information:
Lane Change Assistant, refer to page 234.
Lane Change Assistant: lane change
not possible
Gray line for lane boundary on the ap-
propriate side: system detected a lane
change request. Lane change not cur-
rently possible.
Additional information:
Lane Change Assistant, refer to page 234.
Assisted Driving Mode Plus
The system is active.
Additional information:
Assisted Driving Mode Plus, refer to
page 235.
Blue lights
High beams
High beams have been switched on.
Additional information:
High beams, refer to page 163.
Automatic High Beam Assistant
High beams are switched on via the
Automatic High Beam Assistant.
Additional information:
Automatic High Beam Assistant, refer to
page 164.
Gray lights
Seat belt reminder
Seat belt on the passenger seat or an-
other seat in the vehicle is not buckled.
Additional information:
Seat belts, refer to page 109.
Distance Control
Indicator light flashes: Conditions are
not adequate for the system to work.
The system was deactivated but ap-
plies the brakes until you actively resume con-
trol by pressing on the brake pedal or accelera-
tor pedal.
Additional information:
Distance control, refer to page 224.
Seite 151
Displays
CONTROLS
151
Online Edition for Part no. 01405A88D67 - VI/23