Signal for exceeding speed limit
The warning for exceeding the maximum per-
missible speed can be activated or deactivated
via iDrive:
1. Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Speed Limit Assistant"
7. "Warning when speeding"
Signal for speed limit change
The warning for speed limit changes can be
activated or deactivated via iDrive:
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Speed Limit Assistant"
7. "Sound when speed limit changes."
Settings
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Speed Limit Assistant"
7. Select the desired setting.
System limits
System limits of the sensors
Additional information:
▷ Camera, refer to page 34.
Functional limitations
The system function may be limited and may
provide incorrect information in the following
situations:
▷ Traffic signs are fully or partially concealed
by objects, stickers, or paint.
▷ Traffic signs do not comply with the stand-
ard.
▷ In areas that are not included in the naviga-
tion system map data.
▷ If navigation system map data is invalid,
outdated, or unavailable.
▷ When roads deviate from the navigation
such as due to changes in road layout.
▷ When driving very close to the vehicle in
front of you.
▷ When passing buses or trucks with traffic
signs applied to them.
▷ In case of electronic traffic signs.
▷ When traffic signs that are valid for a paral-
lel road are detected.
▷ In the presence of country-specific road
signs or road layouts.
Speed control systems
Principle
The speed control systems provide support
when driving.
General information
Depending on the equipment, the speed con-
trol systems include the following individual
systems.
Seite 219
Driver assistance systems
CONTROLS
219
Online Edition for Part no. 01405A88D67 - VI/23
To Next Page
Loading...
