BMW i7 - Page 221

The system is shown in white when the sys-
tem can be activated.
The system is grayed out if the system has
failed or if the functional requirements are not
met.
Interrupting speed control systems
automatically
Depending on the system, speed control
systems are interrupted automatically, for in-
stance in the following situations:
▷ When moving from selector lever position D
to P, N, or R.
▷ While Dynamic Stability Control regulates
driving stability.
▷ While Dynamic Stability Control is disabled.
▷ "SPORT PLUS": the settings for increased
driving dynamics are activated.
▷ When braking manually.
Interrupting speed control systems
manually
▷
Press the button.
▷ Press button to select another
speed control system.
Continuing speed control systems
Press the button.
Turning off speed control systems
automatically
The speed control systems turn off automati-
cally when the drive-ready state is turned off.
Turning off speed control systems
manually
Press and hold this button.
The speed control systems are turned
off and the displays extinguish.
Adjusting speed values
Repeatedly press the rocker button on
the steering wheel up or down until the
desired value is set.
▷ Each time the rocker button is pressed
to the resistance point, the set speed in-
creases or decreases by 1 mph/1 km/h.
▷ Each time the rocker button is pressed past
the resistance point, the set speed changes
by a maximum of 5 mph/10 km/h.
Display in the instrument cluster
Display in the speedometer
A mark is displayed on the
speedometer for the set speed.
▷
Green marking: system is ac-
tive.
▷ Gray marking: system is in-
terrupted.
▷ No marking: system is switched off.
Notifications
In addition to the respective check lamps, noti-
fications are displayed for some functions.
The scope of notifications can be set.
1.
Apps menu
2. "Vehicle"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
Seite 221
Driver assistance systems
CONTROLS
221
Online Edition for Part no. 01405A88D67 - VI/23