BMW i7 - Page 225

Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before leaving the vehicle, secure the vehicle
against rolling away.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
▷ Set the parking brake.
▷ On uphill grades or on downhill slopes,
turn the front wheels in the direction of
the curb.
▷ On uphill grades or on downhill slopes,
also secure the vehicle, for instance with
a wheel chock.
Warning
The set speed can be incorrectly adjusted
or called up by mistake. There is a risk of
accident. Adjust the set speed to the traffic
conditions. Watch surrounding traffic closely
and actively intervene where appropriate.
Warning
Risk of accident is greater when there is a
high speed differential to other vehicles, for
instance in the following situations:
▷
When approaching a slowly moving ve-
hicle at speed.
▷ Vehicle suddenly swerving into own
lane.
▷ When approaching stationary vehicles at
speed.
There is a risk of injury or danger to life.
Watch surrounding traffic closely and actively
intervene where appropriate.
Overview
Buttons on the steering wheel
Button Function
Turn last active speed control sys-
tem on/off.
Interrupt and continue speed control
systems.
Select the desired speed control
system.
Store current speed.
Speed Limit Assistant: accept sug-
gested speed manually.
Set speed.
Sensors
The system is controlled by the following sen-
sors:
▷
Camera behind the windshield.
▷ Front radar sensor.
Additional information:
Sensors of the vehicle, refer to page 34.
Application range
The system is best used on well-maintained
roads.
The maximum speed that can be set is limited
and depends, for example, on the vehicle and
the vehicle equipment.
The system can also be activated when sta-
tionary.
Seite 225
Driver assistance systems
CONTROLS
225
Online Edition for Part no. 01405A88D67 - VI/23