BMW i7 - Page 228

6. "Distance control"
7. "Switch to Cruise Control"
The setting is reset when the vehicle is parked.
Displays in the instrument cluster
General information
Depending on the equipment version, the dis-
plays in the instrument cluster may vary.
Display in the speedometer
▷ Green marking: system is ac-
tive, the marking indicates
the desired speed.
▷ Gray marking: system is in-
terrupted, the marking indi-
cates the stored speed.
▷ No marking: system is switched off.
Indicator lights and warning lights
Icon Description
White indicator light:
No Distance Control because acceler-
ator pedal is being pressed.
Indicator light illuminates green:
Vehicle has been detected ahead of
you.
The vehicle icon goes out if no vehicle
has been detected ahead of you.
Indicator light flashes green:
Preceding vehicle has driven off.
Icon Description
Indicator light flashes gray:
Conditions are not adequate for the
system to work.
The system was deactivated but ap-
plies the brakes until you actively
resume control by pressing on the
brake pedal or accelerator pedal.
Warning light flashes red and acous-
tic signal sounds:
Brake and make an evasive maneu-
ver, if necessary.
Assisted View
Depending on the equipment and national-
market version, information for the system is
displayed in the Assisted View in the central
display area of the instrument cluster.
Additional information:
Assisted View, refer to page 158.
Displays in the Head-up display
Set speed
Depending on the equipment, some system
information can also be displayed in the Head-
up display.
Distance information
The icon is displayed when the dis-
tance from the vehicle traveling ahead
is too short.
The distance information is active in the fol-
lowing situations:
▷
Cruise Control with Distance Control
switched off.
▷ Display in the Head-up display selected.
Head-up display, refer to page 144.
Seite 228
CONTROLS
Driver assistance systems
228
Online Edition for Part no. 01405A88D67 - VI/23