Canceling the Back-up Assistant
manually
The assisted reversing by the Back-up Assis-
tant can be canceled manually:
▷ "Cancel"
▷ Press the button.
Canceling the Back-up Assistant
automatically
The system automatically cancels in situations
such as the following:
▷ When the driver grasps the steering wheel
or takes over steering.
▷ When shifting from reverse to another se-
lector lever position.
▷ During activation or intervention by driver
assistance systems.
▷ After an extended period of time when the
vehicle is stationary.
▷ When exiting the stored lane when revers-
ing, for instance with maximum steering-
wheel angle.
▷ When the view on the control display is
overlaid with messages.
▷ In case of a slippery surface.
▷ When the vehicle is rolling such as on a
slope.
▷ In case of changed ambient conditions.
▷ If the vehicle speed exceeds approx.
6 mph/10 km/h.
▷ Reversing Assistant Professional: if sensor
functionality is limited beyond approx. 164
ft/50 m.
System limits
▷
The maximum speed when reversing is
limited to approx. 6 mph/10 km/h.
A warning is issued at a speed of approx.
4 mph/7 km/h.
If the maximum speed is exceeded, the
function is interrupted.
Different influences can lead to side deviations
when driving the stored distance covered in re-
verse. For example, this includes the following
factors:
▷ Steering movements when the vehicle is
stationary while storing the distance cov-
ered.
▷ The speed is not adapted to the distance
covered.
▷ Certain road characteristics such as gradi-
ents, inclines or slippery road surface.
▷ Greatly deviating conditions when storing
and driving the route, for instance other
tires or changed ambient conditions like
weather.
▷ Back-up Assistant Professional: for
changed light conditions.
Also follow the information on system limits in
the "Parking assistance systems" chapter.
Seite 271
Parking
CONTROLS
271
Online Edition for Part no. 01405A88D67 - VI/23
To Next Page
Loading...
