BMW i7 - Page 286

Ventilation in the rear
▷ Change the air flow direction, arrow 1.
▷ Thumbwheel for variable opening and clos-
ing of the air vents, arrow 2.
Ventilation in the rear, on the side
▷ Lever for changing the airflow direction, ar-
row 1.
▷ Thumbwheel for variable opening and clos-
ing of the air vents, arrow 2.
Setting the ventilation
Depending on the desired ventilation, align the
air flow directly or indirectly toward the pas-
sengers.
Air quality
General information
The air quality in the interior is improved by the
following components:
▷
Emission tested passenger compartment.
▷ Interior filter.
▷ Air conditioning system to control the
temperature, air flow and recirculated-air
mode.
▷ Stationary climate control.
Interior filter
The interior filter cleans the incoming fresh
air or the circulated interior air in recirculation
mode.
Depending on the equipment:
▷ Dust and pollen is filtered out from the in-
flowing air.
▷ Nano-particle emissions are reduced.
▷ Gaseous pollutants are filtered.
▷ Microbial particles, viruses and allergens
are filtered.
The manufacturer of the vehicle recommends
having the interior filter changed during vehicle
maintenance.
Pre-conditioning
Principle
Pre-conditioning cools or heats the vehicle in-
terior to a comfortable temperature prior to
starting the trip depending on the inside and
outside temperature. Snow and ice may be re-
moved more easily.
General information
The pre-conditioning can be switched on and
off directly or via a preset departure time.
The air automatically exits through the air
vents to the windshield, the side windows, the
upper body area and into the footwell.
The system switches off automatically after
approx. 30 minutes or when the drive-ready
state is activated.
Seite 286
CONTROLS
Climate control
286
Online Edition for Part no. 01405A88D67 - VI/23