BMW i7 - Page 94

Valet parking mode
Principle
In the valet parking mode, the control display is
disabled.
E.g., this mode can be used when the vehicle
is handed over for valet parking.
General information
Depending on the national-market version, the
valet parking mode may not be available.
Valet Parking mode has the following restric-
tions:
▷ Vehicle settings cannot be changed via
iDrive.
▷ Settings stored to a BMW ID or guest pro-
file cannot be changed.
▷ Personal data cannot be displayed.
▷ The volume of the audio system is limited.
▷ The integrated Universal Remote Control is
deactivated.
▷ Dynamic Stability Control cannot be turned
off.
▷ The availability of certain settings of the
driving modes is limited.
Additional information:
BMW ID/driver profiles, refer to page 68.
Functional requirement
The driver has registered in the vehicle with a
BMW ID.
Activating the valet parking mode
1.
Apps menu
2. "Vehicle"
3. "System settings"
4. "Valet parking mode"
5. "Lock tailgate"
The cargo area is locked and disconnected
from the central locking system.
6. If necessary, "PIN"
If the active BMW ID does not have an as-
signed PIN, this PIN must be set now. The
PIN is needed to deactivate the valet park-
ing mode.
7. If necessary, enter the PIN.
8. "Activate valet parking mode"
Deactivating valet parking mode
1. Select the desired BMW ID on the lock
screen.
2.
▷ Enter the assigned PIN for the BMW ID.
If you have forgotten the PIN: enter the
access data for the BMW ID.
▷ If the selected BMW ID does not have
an assigned PIN: enter the access data
for the BMW ID.
Settings
General information
Depending on the equipment and national-
market version, various settings for opening
and closing are possible.
Unlocking and locking
Doors
1.
Apps menu
2. "Vehicle"
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock"
6. Select the desired setting:
▷ "Driver's door only"
Seite 94
CONTROLS
Opening and closing
94
Online Edition for Part no. 01405A88D67 - VI/23