ball bearing grease into the bearings. Under
no circumstances fill the dust cap completely
and replace because such a procedure may
inject grease into the brake linings (figure
45). For the detailed indication of the
prescribed maintenance jobs and the
corresponding service periods see attached
Maintenance Survey (page 29 and
appendix).
Besides these vital maintenance items there
are some other jobs which must not be done
periodically, but might become necessary due
to a defect of some accessory. To find and
replace a defective fuse (to be seen from the
molten fuse thread) is not difficult if one
knows the location of the fuse. The fuse box
is situated below the instrument panel, the
fuses become accessible on removing the
cover (figure 46).
The various fuses protect the following
circuits:
When a fuse has blown out repeatedly, have
the circuit checked by an expert, because the
fuse replacement is only a temporary remedy,
and will not eliminate the cause of the trouble.
Thus, the examination
21
To Next Page
Loading...
