BMW K 1200 LT User Manual (English)

Other manuals for BMW K 1200 LT

Repair Manual16 pages

Owner's Manual104 pages

Operating Instructions32 pages

Rider's Manual38 pages

Technical Data1 page

Brochure19 pages

Questions and Answers:

E
Eric ShannonJul 26, 2025
What to do if fluid level in BMW Integral ABS is too low and alternate flashing at 1 Hz?
- L
  ljonesJul 26, 2025
  If the fluid level in your BMW Motorcycle Integral ABS is too low and the indicator is flashing alternately at 1 Hz, inspect the motorcycle. First, with the ignition OFF, check if the brake pressure is OK at the brake levers. Then, verify that the brakes are acting on both wheels. Finally, check the brake system for leaks. If any of these checks fail, the brake system is defective.
J
Jason BrooksAug 2, 2025
What to do if fluid level in BMW Integral ABS is too low and alternate flashing at 4 Hz?
- D
  Deborah TurnerAug 2, 2025
  If the fluid level in your BMW Motorcycle Integral ABS is too low, and there's an alternate flashing at 4 Hz, you should perform the following checks: First, with the ignition OFF, check if the brake pressure is OK at the brake levers. Then, verify that the brakes are acting on both wheels. Finally, check the brake system for leaks. If the problem persists, only RESIDUAL BRAKING FUNCTION may be available in at least one circuit. If you have any doubts about the dependability of the brake system, do not ride the motorcycle.
S
Scott RamosAug 10, 2025
What to do if fluid level in BMW Integral ABS is too low (alternate flashing at 1 Hz) in BMW Motorcycle?
- S
  scott82Aug 11, 2025
  If the fluid level in your BMW Motorcycle's Integral ABS is too low, first turn the ignition off and check if the brake pressure is okay at the brake levers. Then, verify if the brakes are acting on both wheels and inspect the brake system for leaks. If any of these checks fail, it indicates a defective brake system.
T
Terri MasseyAug 17, 2025
What to do if fluid level in BMW Integral ABS is too low (alternate flashing at 4 Hz) in BMW K 1200 LT?
- J
  Julie ReedAug 17, 2025
  If the fluid level in your BMW Motorcycle's Integral ABS is too low, perform checks to ensure brake pressure at the levers, brake functionality on both wheels, and leak-tightness of the system. Note that only RESIDUAL BRAKING FUNCTION is available in at least one circuit. If you have any doubts about the dependability of the brake system, do not ride the motorcycle.

BMW K 1200 LT Specifications

General

Displacement	1171 cc
Bore x Stroke	70.5 mm x 75 mm
Compression Ratio	10.8:1
Final Drive	Shaft drive
Fuel System	Electronic fuel injection
Torque	115 Nm at 5, 250 rpm
Transmission	5-speed
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual 320 mm discs
Rear Brakes	Single 285 mm disc
Power	98 hp (72 kW) at 6750 rpm
Wheelbase	1, 634 mm

Summary

Welcome to BMW and Manual Overview

BMW Motorrad Welcome and Manual Purpose

Welcomes the rider and explains the manual's role in familiarizing with the motorcycle.

General Information and Controls

General View: Left Side Components

Identifies and describes the main components and features visible on the left side of the motorcycle.

General View: Right Side Components

Identifies and describes the main components and features visible on the right side of the motorcycle.

Cockpit and Instrument Panel Overview

Details the motorcycle's dashboard, including gauges, telltales, and the multi-function display.

Ignition Switch and Steering Lock Operation

Explains the function of the ignition switch, key positions, and how to engage the steering lock.

Left Handlebar Control Layout

Describes the switches and controls located on the left handlebar, such as cruise control and flashers.

Right Handlebar Control Layout

Describes the switches and controls located on the right handlebar, such as starter and kill switches.

Reverser System Operation

Provides instructions and warnings for engaging, operating, and stopping the motorcycle's reverser.

Cruise Control System Functions

Details how to activate, set, and use the cruise control system for maintaining speed.

On-Board Computer Functions and Display

Explains how to access and interpret data from the on-board computer, including average speed and temperature.

Storage Compartments: Cases and Topcase

Provides instructions on opening, closing, and securing the motorcycle's side cases and topcase.

Front Seat Adjustment and Heating

Guides on opening, adjusting, and locking the front seat, and operating the seat heating system.

Safety Checks and Routine Maintenance

Pre-Ride Safety Checklist Essentials

Lists critical items to inspect before each ride, including fluid levels, tires, and lights.

Engine Oil and Fuel System Management

Details procedures for checking engine oil levels and refuelling the motorcycle safely.

Brake System Checks and ABS Integration

Covers general brake system checks, pad wear, fluid levels, and specific ABS system requirements.

Clutch and Coolant System Fluid Levels

Provides instructions on checking the fluid levels in the clutch and coolant systems.

Suspension, Wheels, and Tire Care

Explains spring preload adjustment and inspection of wheels, tires, tread depth, and pressure.

Load Management and Accessory Use

Advises on correct loading distribution, weight limits, and the safe use of approved motorcycle accessories.

Lights Functionality and Adjustment

Details how to check all motorcycle lights and adjust headlight beam throw.

Riding Operations and Safety

Initial Motorcycle Handling and Break-in Period

Guidance for new riders on familiarizing with the motorcycle and its break-in period for optimal performance.

Critical Safety Notes for Operation

Highlights essential safety warnings regarding ignition system, ABS, exhaust fumes, and catalytic converters.

Starting, Parking, and Stand Usage

Details on switching on ignition, starting the engine, selecting neutral, and using side/main stands.

Understanding Warning Indicator Lights

Explains the meaning and significance of various warning lights displayed on the instrument panel.

Braking Techniques and ABS System Functionality

Details braking principles, ABS operation, and troubleshooting steps for system faults.

Service and Maintenance Recommendations

Authorized BMW Motorrad Dealer Service

Emphasizes the importance of professional maintenance and repair by authorized dealers for advanced technology.

BMW Motorrad Service Network and Support

Describes the extensive service network, breakdown assistance, and support services available to owners.

Concluding Remarks for Owners

Owner's Responsibility for Motorcycle Care and Safety

Reinforces the importance of regular maintenance, using genuine parts, and adhering to manufacturer guidelines.

Related product manuals

BMW K 1200 LT - BROCHURE 2005