BMW M2 - Page 130

Selecting information
You can select what information from the On‐
board Computer is to be displayed on the Info
Display of the instrument cluster.
Via iDrive:
1. "My Vehicle"
2. "iDrive settings"
3. "Displays"
4. "Instrument panel"
5. Select the desired setting.
Indication in the Info Display
The information from the On‐
board Computer is shown in the
Info Display in the instrument
cluster.
Information in detail
Range
Displays the estimated cruising range available
with the remaining fuel.
The range is calculated based on your driving
style over the last 20 miles/30 km.
Average consumption
The average consumption is calculated for the
period while the engine is running.
The average consumption is calculated for the
distance traveled since the last reset by the On‐
board Computer.
Average speed
Periods in which the vehicle is parked with the
engine manually stopped are not included in the
calculation of the average speed.
Resetting average values
Press and hold the button on the turn signal
lever.
Engine oil temperature
Concept
The current engine oil temperature is displayed
in the instrument cluster.
As soon as the optimum operating temperature
has been attained, the indicator is in the center
position.
General information
If the engine oil along with the engine becomes
too hot, a check control message is displayed
too.
When the engine oil temperature is too
high, a red indicator light is displayed.
Display
Seite 130
CONTROLS
Displays
130
Online Edition for Part no. 01402720665 - II/19