46n
Mechanical seat Head restraints
3 Backrest angle
Pull the lever and apply weight to or
remove weight from the backrest as
required.
Adjustments
Height: adjust by pulling up or pushing
down.
In order to move to the lowest
positions, press button 1.<
Adjust the angle of the front head
restraints: by tilting.
Head restraints reduce the risk of
spinal injury in the event of an
accident.
Adjust the head restraint so that its
center is approximately at the height
of your ears.<
Removal
1 Pull the head restraint upward to the
stop
2 Press the button (arrow) and remove
the head restraint.
Installation
1 Press the button (arrow) and insert
the head restraint into the guides
2 Adjust the head restraint.
To Next Page
Loading...
